Gulf Coast Mesh
NetworkMapsMeetingsSetupMesh monitoringNewsletterDocs
Join DiscordJoin the Facebook

Documentation

  • Home

Local Settings & Information

  • MeshCore frequency settings (Louisiana)
  • MeshCore channels (Louisiana)

Hardware & Guides

  • What device should I buy?
  • What antenna should I use?
  • Our standard repeater build

Setup Guides

  • Setting up a MeshCore companion
  • Setting up a MeshCore repeater

Tips & Tricks

  • Change a repeater public key
  • Estimate coverage with Meshmapper

Community

  • Community transparency

Docs

What antenna should I use?

What antenna should I use?

4 Basic Recommendedations (For Repeaters)

Good Small: 18$

ALFA Network Omni

Almost Perfect: $50

Rokland Backcountry N-Male Omni Antenna

Best: $150

It's a diamond, if your into ham; yknow what it is


Handheld Antenna Recommendedations

Heltec's SMA: 6$

For a decent, cheap antenna, handheld antenna, it works

Muzi Works: 13$

915mhz Whip, These are good but seem to have some varaition from each antenna.


Do Not Buy:

Cheap Ebay Whip Antenna

RR: These were terriable, 2.7 at 910.

RAIGEN 8dBi Antenna

Grumpy: "I think these Raigen antennas are worse crap then the Alfa’s", Horrible preformance even with LOS.

Any Bending Antenna (0-90 degree)

Nola Mesh: These antennas are okay when pointing stright up, but bended complely changes the antennna profile.

Signal Plus (Newer Models)

It seems the newer batches of these antennas are performing much worse than ones purchased a few months ago.


Some of the links on this page may be affiliate links, which help fund our community at no additional cost to you. These do not affect our opinion or the recommendations we give.

PreviousWhat device should I buy?NextOur standard repeater build

← All docs

Gulf Coast Mesh

A volunteer mesh-network community spanning the entire US Gulf Coast — from South Texas to the Florida Panhandle. Open hardware, open docs, real neighbors.

contact@louisianamesh.orgSource on GitHub

Supporters

Keeping the network alive.

ma7n5msytalwahsimonkyraterrymikerg3120Mike Baldwin
Buy us a coffee

Every coffee helps.

Partners

Thanks to these businesses for helping us with the mesh.

Heltec AutomationPrecision Marine Performance Engines

© 2026 Gulf Coast Mesh Community

Live mapsNewsletterDocsMkDocs siteTransparency